Rockwell-automation 20P PowerFlex DC Drive - Frame C Field SCR Module Manual de usuario descargar pdf (Pagina 6)

6 PowerFlex® DC Drive - Frame C Field SCR Module

2. Loosen the two captive screws at the top of the Control EMI shield and

partially

lower the shield. The shield will not open to its full extent due

to a cable connection between the Switching Power Supply board and

the Pulse Transformer board.

3. Disconnect the cable from connector XSW on the Switching Power

Supply board and lower the Control EMI shield until it rests on the

drive chassis.

Important: If the drive is not in a vertical position, the Control EMI

shield will not stay open without a means of restraint.

Loosen screws

Remove cable

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Rockwell-automation 20P PowerFlex DC Drive - Frame C Field SCR Module Manual de usuario Pagina 6