Rockwell-automation 2711 ControlNet Communications User Guide Manual de usuario descargar pdf (Pagina 3)

ControlNet Communications 3

Publication 2711-6.10

The PanelView terminal supports release 1.5 of ControlNet.

Unscheduled (peer) addressing of tags is supported. Scheduled (I/O)

addressing is not supported.

ControlNet allows a flexible control architecture that can work with

multiple processors and up to 99 nodes (via taps) anywhere along the

trunk cable of the network. There is no minimum tap separation and

you can access the ControlNet network from every node (including

adapters).

The ControlNet PanelView supports unscheduled PCCC

(Programmable Controller Communication Command) messaging

with the following controllers:

• PLC-5/20C

• PLC-5/40C

• PLC-5/60C

• PLC-5/80C

ControlNet terminals have a 15

on the end of the catalog number, for

example 2711-T9A15.

The ControlNet terminals have:

• ControlNet communication port

• RS-232 printer/file transfer port

In addition, each terminal is available with either AC or DC power

input. The characters L1 at the end of the catalog number designate

a terminal with DC power input (e.g. 2711-T9A15L1

ControlNet Protocol

Compatible ControlNet

Controllers

ControlNet PanelView

Terminals

1 2 3 4 5 6 7 8 ... 20 21

Sin comentarios

Rockwell-automation 2711 ControlNet Communications User Guide Manual de usuario Pagina 3