Rockwell-automation Logix5000 Controllers Nonvolatile Memory Programmi Manual de usuario descargar pdf (Pagina 28)

Chapter 2 Use a memory card reader

When you store a project to a memory card, you define:

• When to load the project (On Power Up, On Corrupt Memory, User

Initiated).

• What mode to set the controller (if the keyswitch is in REM and the Load

mode is not User Initiated).

To assign a project to load from the memory card, edit the Load.xml file on the

card by following the steps that match the numbers in the illustration.

Description

To change the load parameters for a project, use a text editor to open the XML file with the same name as the

project.

Edit the Load Image option of the project.

To set the Load Image option to: Then enter:

On Power Up ALWAYS

On Corrupt Memory CORRUPT_RAM

User Initiated USER_INITIATED

Change the load

parameters

28 Rockwell Automation Publication 1756-PM017F-EN-P – October 2014

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

Sin comentarios

Rockwell-automation Logix5000 Controllers Nonvolatile Memory Programmi Manual de usuario Pagina 28