Rockwell-automation 1204 Reflected Wave Reduction Device Manual de usuario descargar pdf

Installation Instructions

1204 Reﬂected Wave Reduction Device

with Common Mode Choke

(Catalog Number 1204-RWC-17-A)

This publication will guide you through installation (including mounting,

wiring and grounding procedures) of the 1204 Reﬂected Wave Reduction

Device with Common Mode Choke (1204-RWC).

Contents

Where this Option is Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Catalog Number Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Nameplate Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Determining the Maximum Cable Length for your System . . . . . . . . . . . .4

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Where this Option is Used

The 1204 Reﬂected Wave Reduction Device with Common Mode Choke

(RWC) is designed to be used with Allen-Bradley 1336 family of AC drives

with compatible current ratings. Call factory for advice on using the

1204-RWC with drives other than the 1336 family of AC drive. When

installed near the drive, the device can reduce potentially destructive

reﬂected wave spikes that can occur with long motor leads and reduces the

effect of Common Mode noise.

Catalog Number

Explanation

1204 – RWC – 17

(1)

Consult factory for 240V applications.

– A

First Position Second Position Third Position Fourth Position

Type Current Rating Mounting Conﬁg.

Description Letter Description Code Rating Letter Mounting

Bulletin

Number

RWC Reﬂected Wave

Reduction Device

IP20 (NEMA Type 1)

17 17.5 Amps at

380-480V,

12 Amps at

575-600V

A Book Style

(2)

Chassis is rated IP20 (NEMA Type 1) for Book Style mounting.

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - 1204 – RWC – 17

Installation Instructions1204 Reﬂected Wave Reduction Devicewith Common Mode Choke(Catalog Number 1204-RWC-17-A)This publication will guide you throug

Pagina 2 - Speciﬁcations

2 1204 Reﬂected Wave Reduction Device with Common Mode ChokeSpeciﬁcationsInput Power 380-600VAC, Three-PhaseDrive Carrier Frequency 2 kHz Recommended

Pagina 3 - Dimensions

1204 Reﬂected Wave Reduction Device with Common Mode Choke 3Nameplate InformationThe nameplate is located on the front of the unit. In addition, a man

Pagina 4 - Table C: 600V Drives

4 1204 Reﬂected Wave Reduction Device with Common Mode ChokeDetermining the Maximum Cable Length for your SystemThe following tables will help you det

Pagina 5 - Installation

1204 Reﬂected Wave Reduction Device with Common Mode Choke 5InstallationThe following steps will guide you through mounting the Reﬂected Wave Reductio

Pagina 6 - (1.5 in.)

6 1204 Reﬂected Wave Reduction Device with Common Mode Choke3. Mount the device on a vertical metal surface and oriented so the wiring knockouts are o

Pagina 7

1204 Reﬂected Wave Reduction Device with Common Mode Choke 7Wiring4. Wire the device as indicated below. The maximum and minimum wire size accepted by

Pagina 8 - Drive Programming