Rockwell-automation 1394 Analog Servo System Firmware Manual de usuario descargar pdf

Installation Instructions

Installing New 1394 Analog Servo

System Firmware

Catalog Number 1394x-SJTxx-A

Introduction

This publication provides installation instructions for firmware

upgrades in your 1394x-SJTxx-A system module. Use this document

in conjunction with the 1394 Digital AC Multi-Axis Motion Control

System User Manual (publication 1394-5.0).

Important: Although your existing 1394 system configuration will

not change after a firmware upgrade, parameters new to

this version firmware are configured with default

values. Refer to the applicable 1394 release notes for

specific changes.

What this Kit Contains

This kit contains the following items:

• Two EPROMs programmed with the current firmware

• Firmware upgrade instructions

• One firmware upgrade label

• One disposable ESD wrist strap

• Applicable 1394 release notes

Installation Instructions

Follow the procedures below to install your new firmware.

ATTENTION:

The 1394 system module contains

ESD (Electrostatic Discharge) sensitive parts and

assemblies. Static control precautions are required

when installing, testing, servicing, or repairing this

device. Component damage can result if ESD control

procedures are not followed. If you are not familiar

with static control procedures, refer to

Guarding

Against Electrostatic Damage (

publication

8000-4.5.2), or any other applicable ESD Protection

Handbook.

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - System Firmware

Installation InstructionsInstalling New 1394 Analog Servo System FirmwareCatalog Number 1394x-SJTxx-AIntroductionThis publication provides installatio

Pagina 2

Removing the Input Wiring BoardTo gain access to the EPROMs on the control board, you must first remove the input wiring board. To remove the input wi

Pagina 3

Note: To identify the series of your 1394 System Module look in the SERIES field on the data name plate.5.6.Pull the input wiring board straight out (

Pagina 4

Upper Control Board ScrewAlign connectors and push here to engage wiring board with control board Push here to disengagewiring board with control boar

Pagina 5 - Removing the Control Board

Removing the Control BoardTo remove the control board:1. Gently pull the control board straight out from the enclosure. Be careful not to snag the mou

Pagina 6

3. Using a PROM puller or other appropriate tool, remove the old firmware EPROMs from sockets U28 and U30. Gently pull EPROMs straight up and out of t

Pagina 7

Re-Installing the Input Wiring BoardTo re-install the input wiring board:1. Line up the connector pins on the back of the input wiring board with the

Pagina 8

Publication 1394-6.1 — February 2000 74102-206-01(01)If your 1394 system module is:Attach the firmware upgrade label next to the data name plate, as s

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1394 Analog Servo System Firmware Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1394 Analog Servo System Firmware. Rockwell Automation 1394 Analog Servo System Firmware User Manual [en] Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1394 Analog Servo System Firmware