Rockwell-automation 1492-CM1771-LD003 Field Conversion Module Manual de usuario descargar pdf (Pagina 1)

Digital I/O Conversion Module

(Cat 1492-CM1771-LD003)

I. Description

This Digital I/O Conversion Module provides for the conversion of (1) 1771, 32 point I/O modules to be converted to (1)

1756, 32 point I/O module and consists of the following:

(1) 1771 Module (32pt) to (1) 1756 Module (32pt)

(2) Conversion Modules: 1492-CM1771-LD003

(1) Cable: 1492-CONCAB005Z (Table 2, Section III)

(1) Conversion Mounting Assembly: 1492-MUA… (Table 1, Section II)

This conversion is accomplished without the removal of any field wires from the existing 1771 Swing Arm. The existing

1771 Swing Arm fits directly onto the edge connector of the 1492 Conversion Module. On one end of the 1492 Cable

is (1) connector for the Conversion Module. On the other end is the Removable Terminal Block (RTB) for the 1756 I/O

module, as shown in the photo below. The I/O signals are routed through the 1492 Conversion Module and the 1492

Cable to the appropriate terminals on the 1756 I/O module per the Wiring Diagrams in Section V. As standard, both

portions of the 1492 Cables are 0.5M long, but we also offer a 1.0M cable length. Refer to the footnotes in Table 2,

Section III for further details.

PN-114275

DIR 10000060086 (Version 01)

Publication 1492-IN033B-EN-E

Printed in U.S.A.

Conversion Compatibility and

Product I.D. Label

37-Pin Connector for cable 1492-CONCAB

Z

De-energize and lockout any and all power to all I/O field devices connected to the A-B 1771 I/O

Chassis, and the power to the 1771 I/O Chassis itself. Ensure all power is de-energized and locked out to

any device in the control cabinet where the conversion is to be performed. Ensure work is performed by

qualified personnel.

WARNING

1492-CM1771-LD003 Conversion Module

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - (Cat 1492-CM1771-LD003)

Digital I/O Conversion Module(Cat 1492-CM1771-LD003)I. DescriptionThis Digital I/O Conversion Module provides for the conversion of (1) 1771, 32 point

Pagina 2 - II. Installation

(2)II. InstallationThe 1492 Conversion Modules must be installed in a 1492 Conversion Mounting Assembly (see Table 1 below). A complete System Instal

Pagina 3 - III. Compatiblity

(3)III. CompatiblityFoot Notes: To understand any issues concerning I/O module compatibility, refer to the Installation Manuals for the specific 1771

Pagina 4 - V. Wiring Diagrams

(4)PN-114275DIR 10000060086 (Version 01)Publication 1492-IN033B-EN-EV. Wiring Diagrams1771-WN Swing ArmFrom 1771-IANThere are several key application

Pagina 5

1771-WN Swing ArmFrom 1771-IBNV. Wiring Diagrams (Continued)There are several key application considerations and system specifications (bottom of draw

Pagina 6 - Publication 1492-IN033B-EN-E

PN-114275DIR 10000060086 (Version 01)Publication 1492-IN033B-EN-EPrinted in U.S.A.

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1492-CM1771-LD003 Field Conversion Module Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1492-CM1771-LD003 Field Conversion Module. Rockwell Automation 1492-CM1771-LD003 Field Conversion Module User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Rockwell-automation 1492-CM1771-LD003 Field Conversion Module Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1492-CM1771-LD003 Field Conversion Module. Rockwell Automation 1492-CM1771-LD003 Field Conversion Module User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1492-CM1771-LD003 Field Conversion Module