Rockwell-automation 1751 SynchLink 4-Port Splitter Block Installation Manual de usuario descargar pdf (Pagina 7)

SynchLink 4-port Splitter Block 7

Publication 1751-IN002A-EN-P - March 2001

6. Use DIN rail end anchors to secure the units together. (Allen-Bradley

catalog number 1492-EAH35)

7. Connect pre-terminated cables to the fiber optic connectors as shown.

ATTENTION

Make certain that the splitter block and base block are

secured together with DIN rail anchors. Failure to do so

may result in the loss of communications and/or cause

damage to the blocks.

Failure to use the DIN rail interlocks in hazardous

location installations could cause an explosion.

ATTENTION

Do not look directly into the fiber ports or fiber cables.

Light levels may cause damage to eyesight. The splitter

block is a Class 1 LED product.

31205-M

Connect channels 1 - 4 to the SynchLink

station receivers.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Rockwell-automation 1751 SynchLink 4-Port Splitter Block Installation Manual de usuario Pagina 7