Rockwell-automation 1757-PLX52 ProcessLogix Controller Module Installa Manual de usuario descargar pdf (Pagina 7)

ProcessLogix Controller 7

Publication 1757-IN901D-EN-P - May 2007

Install the Battery

The battery is disconnected during shipping to conserve power. Follow this procedure to

install the battery.

1. Open the front door of the 1757-PLX52 controller.

2. Locate the battery connector (a small, white plug at the end of a pair of red and black

twisted wires).

Battery holder

Battery lead terminal

42788

3. Turn the plug so that the wires enter the plug from the right.

WARNING

When you connect or disconnect the battery an electrical arc can occur. This

could cause an explosion in hazardous location installations. Be sure that

power is removed or the area is nonhazardous before proceeding.

For Safety information on the handling of lithium batteries, including handling

and disposal of leaking batteries, see Guidelines for Handling Lithium

Batteries, publication AG 5-4.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Rockwell-automation 1757-PLX52 ProcessLogix Controller Module Installa Manual de usuario Pagina 7