Rockwell-automation 1769-SM1 Compact I/O-to-DPI/SCANport Network Commu Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1769-SM1 Compact I/O-to-DPI/SCANport Network Commu. Rockwell Automation 1769-SM1 Compact I/O-to-DPI/SCANport Network Communication Module User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions
1769-SM1 Compact I/O-to-DPI/SCANport
Network Communication Module
This document explains how to install a 1769-SM1 Compact I/O-to-DPI/SCANport
Network Communication Module into the controller.
Related Documentation
Documentation can be obtained online at www.rockwellautomation.com/literature.
To order paper copies of technical documentation, contact your local Rockwell
Automation distributor or sales representative.
For information such as firmware updates and answers to drive-related questions, go
to the Drives Service & Support web site at www.ab.com/support/abdrives
and click
on the “Downloads” or “Knowledgebase” link.
!
ATTENTION: Risk of equipment damage exists. Remove power before
installing or removing the 1769-SM1 module. When you install or remove
the module with power applied, an electrical arc may occur. An electrical
arc can cause personal injury or equipment damage by:
Sending an erroneous signal to your system’s field devices, causing
unintended machine motion.
Causing an explosion in a hazardous environment.
Electrical arcing causes excessive wear to contacts on both the module
and its mating connector. Worn contacts may create electrical resistance.
!
ATTENTION: Risk of equipment damage exists. The 1769-SM1
module contains ESD (Electrostatic Discharge) sensitive parts that can be
damaged if you do not follow ESD control procedures. Static control
precautions are required when handling the module. If you are unfamiliar
with static control procedures, refer to Guarding Against Electrostatic
Damage, Publication 8000-4.5.2.
Document Description
1769-SM1 Compact I/O-to-DPI/SCANport
Network Communication Module User
Manual, publication 1769-UM010
Provides complete installation, wiring, setup, and
communication information for the 1769-SM1 Network
Communication Module.
Guarding Against Electrostatic Damage,
publication 8000-4.5.2
Provides static control procedures for protecting
electrostatic discharge sensitive parts.
Wiring and Grounding Guidelines for PWM
AC Drives, publication DRIVES-IN001
Guidelines for proper wiring, grounding, and shielding, and
standard practices for noise protection.
Step 1
Remove power from the controller.
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Installation Instructions

Installation Instructions1769-SM1 Compact I/O-to-DPI/SCANportNetwork Communication Module This document explains how to install a 1769-SM1 Compact I

Pagina 2

2 Step 2Set the 1769-SM1 module Configuration Mode switch to an appropriate position. For complete switch setting details, see the 1769-SM1 module

Pagina 3 - DPI / SCANport

3 Step 4Mount the 1769-SM1 module.Maintain spacing from enclosure walls, wireways, adjacent equipment, etc. Allow 50 mm (2 in.) of space on all sid

Pagina 4

4 Figure 2 1769-SM1 Module with CompactLogix Controller Figure 3 1769-SM1 Module with Remote 1769-Based Adapter Using Module as a TemplateThe

Pagina 5

5 e. Place the modules back on the panel, and check for proper hole alignment.f. Attach the modules to the panel using the mounting screws.B. DIN

Pagina 6

6 F. Before installing the replacement 1769-SM1 module, be sure that the bus lever on the right-side adjacent module is in the unlocked (fully ri

Pagina 7

7 Step 8Apply power.A. Apply power to the controller. The status indicators can be viewed on the front of the 1769-SM1 module after power has been

Pagina 8

Notes:www.rockwellautomation.comAmericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (

Comentarios a estos manuales

Sin comentarios