Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Manual de usuario descargar pdf (Pagina 4)

4 ControlNet Communication Interface Card

Publication

1784-5.33 – September 1997

ATTENTION:

This digital apparatus does not exceed the Class A

limits for radio noise emissions from digital apparatus set out in the

Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la class A

prescrites dans le Règlement sur le brouillage radioélectrique édicté par

le ministère des Communications du Canada.

Handling the Card

ATTENTION:

The card uses CMOS technology

, which is highly

sensitive to electrostatic dischar

ge (ESD). ESD may be present

whenever you are handling the card. Handling a card

without any ESD protection can cause internal circuit

damage that may not be apparent during installation

or initial use. A grounding wrist strap has been

shipped with the card and is to be worn during the

installation procedure. Instructions for use of the

strap are found on the back of its package.

ake these precautions to guard against ESD damage:

• Before handling the card, be sure to wear the provided static strap and touch

a grounded object to discharge any built-up static charge.

• Avoid touching the backplane connector or interface connector pins located

on the card.

• If the card is not in use, store it in the anti-static clamshell that the card was

shipped in.

Important: Remember

, a computer with ac power disconnected is

not

grounded object.

You are now ready to configure your card.

wrist-strap

grounding

device

1 2 3 4 5 6 7 8 9 ... 17 18

Sin comentarios

Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Manual de usuario Pagina 4