Rockwell-automation 1784-PKTX_PKTXD Communication Card User Manual Manual de usuario descargar pdf (Pagina 16)

3-2 Installing the Card and the Drivers

Publication 1784-UM527B-EN-P - October 2003

Installing the Plug and Play Drivers

Following these instructions to install your Plug and Play (PnP) drivers:

1. Upon startup, Microsoft Windows should detect the PKTX card and start the ‘New

Hardware Wizard’. Click Next.

2. Insert your RSLinx CD into your CD-ROM drive (if it auto-starts, Exit the RSLinx

installation).

3. When prompted by the New Hardware Wizard, select ‘Search for a suitable driver...’

and click Next.

4. When the ‘Locate Driver Files’ screen appears, select ‘Specify a location’ and click

Next.

5. When prompted to specify the location, browse to ‘D:\RSLinx\PnP_Drivers’

(where D: is the CD-ROM drive with your RSLinx CD).

6. Follow decision table below:

7. Click OK.

The screen should indicate the driver has been found.

8. Click Next.

You should get a message that Windows has successfully added the PKTX. If not

successful, call Rockwell Technical support at 440-646-5800 (if you have an

appropriate support contract) or submit a request at

http://support.rockwellautomation.com.

9. Click Finish.

What to Do Next

Chapter 4 explains how to connect the PKTx card to various networks and devices.

If your operating system is browse to and select file

Microsoft Windows XP or 2000 Win2K\1784-PKTX(D) pktx2000.inf

Microsoft Windows 9x Win9x\1784-PKTX(D) rsipktx.inf

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sin comentarios

Rockwell-automation 1784-PKTX_PKTXD Communication Card User Manual Manual de usuario Pagina 16