Rockwell-automation 193-DNCT DeviceNet Configuration Terminal User Man Manual de usuario descargar pdf (Pagina 77)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 73

Terminal Setup Menu Chapter 17

intervention at power-up. The following choices appear when AutoDspl is

selected from the Terminal Setup Menu:

AutoDisplay Setup

This screen is used to set up to four Class, Instance Attributes to be auto

displayed. This screen allows a different node address to be entered for each CIA

value configured, thus up to four different nodes can be monitored at the same

time. Setting the node address to 64 for a CIA disables Auto Display for that

value. Use the Sel key to select different fields to edit.

AutoDisplay Test

This function gives the operator an easy way to view and test the AutoDisplay

setup data without powering down the 193-DNCT after setting up each line. If

the CIA data for a line points to the parameter class, the 193-DNCT will display

the scaled value and units (if any) for that line.

CIA Copy and

Paste is

available for this

menu.

Device node

number

Display line

number

(1…4)

This enables or disables the

AutoDisplay on power up. It

can be set on the screen for

any line number but this value

will be the same for all 4 lines.

Class, Instance,

Attribute data

CIA NOT pointing

to a parameter

object

CIA pointing to

a parameter

object

Note: AutoDisplay can

be configured to show

4 lines as shown here

or 1, 2, or 3 lines.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 91 92

Sin comentarios

Rockwell-automation 193-DNCT DeviceNet Configuration Terminal User Man Manual de usuario Pagina 77