Rockwell-automation 20-750-PNET Profinet Single Port Option Module Manual de usuario descargar pdf (Pagina 12)

12 Rockwell Automation Publication 750COM-UM006A-EN-P - January 2013

Chapter 1 Getting Started

Features

The features of the option module include the following:

• Captive screws to secure and ground the option module to the drive.

• An IP Address Selection Jumper to set the source of the network address

for the option module before applying power to the drive. By setting the

jumper on pins 2 and 3, the network address can be configured using

option module parameters or the default IP address. By selecting pins 1

and 2, the network address can be configured by using a Profinet controller

with DCP capability or a DHCP server.

• Compatibility with the following configuration tools to configure the

option module and host drive:

– PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM (Human Interface

Module) on the drive, if available

– Connected Components Workbench software, version 1.02 or later

– DriveExplorer software, version 6.01 or later

– DriveExecutive software, version 5.01or later

– Third party Profinet controlling and monitoring software

• Status indicators that report the status of the option module and network

communication. They are visible when the drive cover is removed.

• Parameter-configurable 32-bit Datalinks in the I/O to meet application

requirements (16 Datalinks to write data from the network to the drive,

and 16 Datalinks to read data from the drive to the network).

• Acyclic Messaging support.

• Master-Slave hierarchy that can be set up so that the option module and

PowerFlex 750-Series drive transmit data to and from a Profinet controller

on the network.

• User-defined fault actions to determine how the option module and

connected drive respond to the following:

– I/O messaging communication disruptions (Comm Flt Action)

– Controllers in Idle mode (Idle Flt Action)

• Web pages, viewed by using a web browser, that show information about

the option module, its host drive, and DPI devices connected to the drive.

• Configurable e-mail messaging to desired addresses when selected drive

faults occur and/or are cleared, or when the option module takes a

communication or idle fault action.

• Access to any PowerFlex drive and its connected peripherals on the

network to which the option module is connected.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Sin comentarios

Rockwell-automation 20-750-PNET Profinet Single Port Option Module Manual de usuario Pagina 12