Rockwell-automation 2080-REMLCD Micro800 Remote LCD Installation Instr Manual de usuario descargar pdf (Pagina 12)

12 Micro800 Remote LCD

Rockwell Automation Publication 2080-IN010A-EN-P – December 2013

Follow these steps to mount the remote LCD through the front panel.

1. Make sure the sealing gasket is properly positioned on the module.

This gasket forms a compression type seal. Do not use sealing compounds.

2. Place the module in the panel cutout.

3. Once the unit is placed in the panel, tighten the mounting screws evenly to a torque

between 0.5…0.6 Nm (4.42…5.31 lb-in.) to maintain water and dust resistance. Make

sure the panel is clean and strong enough to hold the unit.

IMPORTANT

The module temperature must be greater than 0 °C (32 °F) during panel

installation.

ESC

F1 F2

USB

ESC

F1 F2

USB

The module is shipped with the Allen-Bradley logo

sticker (36.70 x 4.70 mm). You can customize this

space with your product logo.

46251

Top view

Side view

Panel

46252

Clamp accessories

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Rockwell-automation 2080-REMLCD Micro800 Remote LCD Installation Instr Manual de usuario Pagina 12