Rockwell-automation 20D-MDI-C1 Multi-Device Interface Option Board for Manual de usuario descargar pdf (Pagina 3)

Multi-Device Interface Option Board for PowerFlex® 700S Drives 3

Step 2: Remove the Drive

Cover(s)

Frame 1 - 6 Size Drives

Esc

7 8 9

4 5 6

1 2 3

0 +/-

Sel

Jog

Alt

Exp

Param #

/ M

DRIVE

SYNCHLINK

ENABLE

ase

Task Action

Loosen the captive screw.

Push down on the front cover.

Pull the front cover away from the assembly.

Pull the side cover forward.

Lift the side cover off of the control assembly.

Phase II Control

Action

Frames 1-4

Locate the slot in the upper left corner of the drive cover. Slide

the locking tab up and swing the cover open. Special hinges

allow cover to move away from drive and lay on top of an

adjacent drive (if present).

Frame 5

Slide the locking tab up, loosen the right-hand cover screw and

remove the cover.

Frame 6

Loosen the two screws at the bottom of the drive cover. Carefully

slide the bottom cover down and out. Loosen the two screws at

the top of the cover and remove the cover.

1 2 3 4 5 6 7 8 ... 19 20

Sin comentarios

Rockwell-automation 20D-MDI-C1 Multi-Device Interface Option Board for Manual de usuario Pagina 3