Rockwell-automation 20L-RESPRE-A1 PowerFlex 700L Frame 3A and 3B Input Manual de usuario descargar pdf (Pagina 2)

2 PowerFlex® 700L Frame 3A and 3B Input Filter Precharge Resistor Kit (20L-RESPRE-A1)

Parameter 162 - [Capacitance] of the PowerFlex 700L Active Converter

must be set to the total DC bus capacitance of the PowerFlex 700L complete

drive plus the other drives connected to the DC bus.

What This Kit Includes

• Precharge Resistor Plate Assembly

• Four (4) M6 x 16 mm (0.63 in.) long hex head Taptite

screws

Taptite is a registered trademark of REMINC (Research Engineering & Manufacturing Inc.)

Note: The customer must provide wire, lugs, and hardware.

Tools That You Need

• 10 mm socket

• Phillips

#1 screwdriver

• Phillips

#2 screwdriver

• Torque wrench

• Wire stripper

Phillips is a registered trademark of Phillips Screw Company.

What You Need to Do

To install the PowerFlex

700L Frame 3A and 3B Precharge Resistor Kit:

❐ Step 1: Remove power from the complete drive.

❐ Step 2: Drill installation holes (only required for input filter panel

without holes).

❐ Step 3: Mount the kit.

❐ Step 4: Wire the kit.

1 2 3 4 5 6 7 8

Sin comentarios

Rockwell-automation 20L-RESPRE-A1 PowerFlex 700L Frame 3A and 3B Input Manual de usuario Pagina 2