Rockwell-automation 20P PowerFlex DC Drive Communication Interface Cab Manual de usuario descargar pdf

Installation Instructions

PowerFlex

DC Drive Communication Interface

Cable

What This Kit Includes

• Communication Interface cable

• Static Strap

Tools That You Need

• Phillips

screwdriver

Phillips

is a registered trademark of Phillips Screw Company.

What You Need to Do

To install the Communication Interface cable:

❐ Step 1: Remove power from the drive

❐ Step 2: Remove the protective covers and existing Communication

Interface cable

❐ Step 3: Install the protective covers and new Communication

Interface cable

ATTENTION: Only qualified personnel familiar with DC

drives and associated machinery should plan or implement the

installation, start-up and subsequent maintenance of the system.

Failure to comply may result in personal injury and/or equipment

damage.

ATTENTION: To avoid an electric shock hazard, ensure that

all power to the drive has been removed before performing the

following.

ATTENTION: This drive contains ESD (Electrostatic

Discharge) sensitive parts and assemblies. Static control

precautions are required when installing, testing, servicing or

repairing this assembly. Component damage may result if ESD

control procedures are not followed. If you are not familiar with

static control procedures, reference A-B publication 8000-4.5.2,

“Guarding Against Electrostatic Damage” or any other

applicable ESD protection handbook.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - PowerFlex

Installation InstructionsPowerFlex® DC Drive Communication Interface Cable What This Kit Includes• Communication Interface cable• Static StrapTools T

Pagina 2 - L1 L2 L3

2 PowerFlex® DC Drive Communication Interface Cable Step 1: Remove Power from the Drive1. Remove and lock-out all incoming power to the drive. Step 2:

Pagina 3

PowerFlex® DC Drive Communication Interface Cable 3 3. Remove the top protective cover from the drive:a. For frame A drives, press in on the sides at

Pagina 4 - 1.5 N-m (13.3 lbs.-in.)

4 PowerFlex® DC Drive Communication Interface Cable b. On frame B and C drives, loosen, but do not remove, the screws that secure the top protective c

Pagina 5 - Related Documentation

PowerFlex® DC Drive Communication Interface Cable 5 4. Disconnect the Communication Interface cable from the connector on the upper right corner of th

Pagina 6