Rockwell-automation 2706 Dataliner 10 Message Display Manual de usuario descargar pdf (Pagina 10)

Dataliner DL10 Message Display10

Connecting AC Power

The table below shows the electrical ratings for the Dataliner DL10 display.

Catalog Number Supply Voltage Power Consumption

2706-A41C

2706-A41J

120V ac, 60 Hz 55 VA maximum

2706-A42C

2706-A42J

240V ac, 50 Hz 55 VA maximum

ATTENTION: Terminal 3 (Protective Earth) must be connected to a

reliable low impedance earth ground to protect the display from electrical

noise. This ground connection will also protect personnel from electrical

shock if the electronics short to the DL10 case.

ATTENTION: The Dataliner DL10 display is designed for safe use

when installed in a suitably rated NEMA Type 12, 13, 4X (indoor use

only), IP54 or IP65 enclosure.

ATTENTION: Do not apply power to the display until all wiring

connections have been made. Failure to do so may result in electrical

shock.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Rockwell-automation 2706 Dataliner 10 Message Display Manual de usuario Pagina 10