Rockwell-automation 2711 PanelBuilder Software Getting Started Manual de usuario Pagina 34
- Pagina / 110
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
3–8 Overview of Sample Application
Publication 2711-6.2
Remote I/O Application Tags
This section defines the GSRIO project tags that are used by the
Remote I/O application. These tags read or write data to bit, integer
and input/output files associated with a PLC 5/25 controller on a
Remote I/O link.
GSRIO Project Tags for Remote I/O Application
This object Uses this tag To
Motor_Start
Motor_Start_Ind
Start the motor by setting bit I:010/10 ON (1).
Control state change by monitoring bit O:010/10.
Motor_Stop
Motor_Stop_Ind
Stop the motor by setting bit I:010/11 ON (1).
Control state change by monitoring bit O:010/11.
Motor_Stop_Ind Display the current status (START or STOP) of the
motor by reading bit O:010/11.
Motor_AutoManual Set the motor to AUTO or MANUAL mode by
writing an unsigned integer value to N7:10.
Motor_AutoMan_Ind Display the current mode (AUTO or MANUAL) of
the motor by reading the data at N7:3.
Motor_Speed Enter a new motor speed (0 to 1000 rpm) by writing
an unsigned integer value to N7:13.
Motor_Spd_Notify When a new motor speed is entered, the bit at
N7:11/4 is set ON (1). The scratch pad remains
open until new motor speed is written to N7:13.
The terminal clears bit N7:11/4 when the
Motor_Spd_Handshk tag is set (ON) 1.
Motor_Spd_Handshk Sets bit N7:2/2 ON (1) when the new motor speed
is written to the Motor_Speed tag at N7:13.
The ladder logic program clears bit N7:2/2.
Motor_Speed_Ind Display the current motor speed in numeric form (0
to 1000 rpm) by reading the data at N7:1.
Motor_Speed_Ind Display the current motor speed in a graphic form
by reading the data at N7:1.
Motor_Speed_Dec Decrease the motor speed by setting bit N7:11/0 ON
(1) and OFF (0) in Manual Mode.
Motor_Speed_Inc Increase the motor speed by setting bit N7:11/1 ON
(1) and OFF (0) in Manual Mode.
Messages Trigger a message to appear in the Alarm Banner
by reading the trigger value at N7:4.
- Getting Started 1
- Software 1
- Allen-Bradley 1
- Important User 2
- Information 2
- 3
- Creating the Sample 4
- PanelView Terminal Setup 5
- Entering the Application Tags 5
- Validating and Downloading 5
- Running the Application 5
- Contents of this Guide 6
- Conventions 7
- Related Publications 7
- What You Need 8
- PrefaceP–4 9
- Preface P–5 10
- PanelBuilder Basics 13
- PanelBuilder 14
- Application File Window 15
- Application Screen Window 15
- Accessing 16
- Placing Objects 17
- 1–6 PanelBuilder Basics 18
- • Or select another object 19
- Sizing Objects 20
- Moving Objects 20
- Getting Help 21
- Initial System Setup 22
- 2–2 Initial System Setup 23
- 0 Port of SLC 5/03 or 5/04 23
- 2–3Initial System Setup 24
- 2–4 Initial System Setup 25
- 82 or 150 25
- Loading the SLC 26
- Ladder Logic Program 26
- Loading the PLC 26
- 27
- Application Screens 28
- Motor Status Screen 29
- • start and stop motor 29
- Alarm Banner 31
- Application Tags 32
- Remote I/O Application Tags 34
- Cr eating the Sample 35
- Application 35
- Starting PanelBuilder 36
- Opening a New Application 37
- Creating 38
- Setting Grid Attributes 39
- For Color 41
- Type Motor_Stop 43
- Type Motor_Stop_Ind 43
- Select F2 43
- Creating the Mode Indicator 51
- Creating the 52
- Status Indicator 55
- Motor Speed Screen 59
- Creating the RPM Data Display 71
- Linking the Motor Speed 73
- Creating Alarms 74
- Message does not appear in 75
- Type Messages Select Value 75
- Saving the Application 77
- Defining Remote I/O 79
- Communication Settings 79
- 5–3PanelView Terminal Setup 80
- Defining DH-485 81
- DH+ Communication 82
- Settings 82
- 5–6 PanelView Terminal Setup 83
- This icon indicates 86
- TAB key 86
- To exit the Tag Editor: 88
- Using the Form View 89
- Closing the Application 93
- 8–2 Running the Application 95
- Running the Motor 96
- 8–4 Running the Application 97
- SLC Ladder Logic Pr ogram for 98
- DHĆ485/DH+ Application 98
- Publication 2711-6.2 100
- PLC Ladder Logic Pr ogram for 102
- Remote I/O Application 102
- DH+ Application 107
- PanelBuilder Tools 110
Relacionado con productos y manuales para Equipo Rockwell-automation 2711 PanelBuilder Software Getting Started
Equipo Rockwell-automation 2711-NL7_NL9_NL10 Display Backlight for PanelView Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 2094-BSP2 Kinetix 6000 Shunt Module Installation I Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Manual de usuario
(292 paginas)
(292 paginas)
Equipo Rockwell-automation 2090-UCSR-A300 300 W Active Shunt Regulator Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 6189V-25HDDSA Replacing Hard Disk Drive Shock Moun Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 60-212 PHOTOSWITCH Miniature Universal Control Bas Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 2711P-Rxxxx Logic Module, Internal CompactFlash, a Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 2706-LV2xX, -LV4xX Dataliner DL40 Plus Message Dis Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 2711C-xxxx PanelView Component HMI Terminals Manual de usuario
(146 paginas)
(146 paginas)
Equipo Rockwell-automation 9306 DriveExplorer Software Set Up and Reference C Manual de usuario
(2 paginas)
(2 paginas)
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales