Rockwell-automation 2711C-xxxx PanelView Component HMI Terminals Manual de usuario descargar pdf (Pagina 129)

Publication 2711C-UM001I-EN-P - July 2014 129

Appendix

E

Firmware Update Utility

Chapter Objectives

This appendix shows how to use the PanelView Component Firmware Update

Utility to perform recovery and maintenance operations on a PanelView

Component terminal that is in a non-operating state.

About the Utility

The PanelView Component Firmware Update Utility is a PC application that

interacts with the Boot Loader on the terminal via a USB connection to perform

maintenance actions on the terminal firmware. The utility supports a firmware

maintenance capability that is independent of the operating system and/or the

other firmware elements on the terminal.

Use the utility only to recover from fatal conditions.

• A non-functioning operating system that resulted from a failed or

interrupted firmware upgrade.

• A corrupted file system that blocks the operating system.

• A corrupted Windows registry that blocks the operating system.

The utility always requires a companion firmware image, SC XX-XX.IMG, even

if you are only performing a Clean File System or Clean Registry operation.

Download the utility and the firmware image from:

http://ab.rockwellautomation.com/Graphic-Terminals/2711C-PanelView-Co

mponent-Terminals.

IMPORTANT

Use the utility described in this appendix only if the terminal is

not operable.

TIP

Always use the firmware upgrade described in Chapter 5 when

you want to upgrade firmware to an operating terminal and

functioning operating system.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 145 146

Comentarios a estos manuales

Sin comentarios