Rockwell-automation 284G ArmorStart - Safety Version - Getting Started Manual de usuario descargar pdf (Pagina 11)

Publication 284GS-QS001A-EN-P - May 2009

Grounding

Connect a grounding conductor to the terminal provided as standard on each

ArmorStart Distributed Motor Controller. Refer to Table 2 for grounding

provision location. There is also an externally available ground terminal.

Refer to Figure 10.

LED Status Indication The LED Status Indication provides 4 status LEDs and a Reset button. The

LEDs provide status indication for the following:

• POWER LED

The LED is illuminated solid green when control power is present and

with the proper polarity

• RUN LED

This LED is illuminated solid green when a start command and control

power are present

•NETWORK LED

This bi-color (red/green) LED indicates the status of the

communication link

•FAULT LED

Indicates Controller Fault (trip) condition

The “Reset Button” as a local trip reset.

Figure 7 LED Status Indication and Reset

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Sin comentarios

Rockwell-automation 284G ArmorStart - Safety Version - Getting Started Manual de usuario Pagina 11