Rockwell-automation 6155R Industrial Non-display Computers Manual de usuario descargar pdf (Pagina 22)

Publication 6155R-UM001G-EN-P - July 2007

22 Installation

Mount the Computer on a Wall

You can mount the VersaView 200R computer on a wall inside a

machine by using mounting brackets. The brackets secure the

computer to the wall.

1. Attach the two mounting brackets to the rear of the computer

by using four of the provided, M3 x 12 mm panhead screws;

torque to 0.678 Nm (6 lb-in).

2. Drill four holes in the wall that correspond to the holes in the

mounting brackets.

Dimensions are in mm (in.).

3. Position the computer against the wall, aligning the holes in the

mounting brackets with the holes in the wall.

4. Insert the remaining screws through the mounting bracket into

the wall and tighten.

For the VersaView 200R computer, use four M3 x 5 mm,

panhead screws.

TIP

Support the computer with a shelf or other means to make

installation at the appropriate height easier.

92.00 [3.62]

115.40 [4.54]

11.7 [4.61]

192.20 [7.57]

204.20 [8.04]

172.20 [6.78]

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Sin comentarios

Rockwell-automation 6155R Industrial Non-display Computers Manual de usuario Pagina 22