Rockwell-automation 6157-C User Manual Manual de usuario descargar pdf (Pagina 17)

Industrial 19" CRT Monitor

Publication 6157-UM001A-EN-P

Rack Mounting Procedure

Step 1 - Locate the mounting areas:

You must allocate the required space in your enclosure for the monitor.

The monitor’s panel height is 9 rack units (15.75 in. or 400 mm) and you

must determine if panel spacers are required above or below the monitor.

Locate the following areas to mount the slides:

•

Locate the points at which the bottom edge of the monitor front panel

will intersect the cabinet front mounting rails. The four slots in the

monitor front panel should be aligned with holes in the front

mounting rails.

•

Locate points on the front rails 5.25 in. (133 mm) above the points of

where the bottom edge of the monitor panel intersects the rail. These

points indicate the center line of each slide.

•

Locate points on the rear rails equal in height to the slide center line

points on the front rails.

Figure 7

Mounting Areas on a Rack

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Sin comentarios

Rockwell-automation 6157-C User Manual Manual de usuario Pagina 17