Rockwell-automation Logix5000 Systems: Connecting PowerFlex 40 Drives Manual de usuario descargar pdf (Pagina 21)

Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012 21

Chapter

Add the PowerFlex 40 Drive to an RSLogix 5000 Project

In this chapter, you add a 22B-V2P3N104 drive to an RSLogix 5000 project and configure it.

You also download the project to the controller so you can verify communication with the drive.

Before You Begin

You must complete these tasks before using this chapter:

• The tasks described in Before Using This Publication on page 5, including:

– Prepare the Logix5000 control system hardware

– Prepare the computer

– Configure the networks - The tasks described in this chapter require an

EtherNet/IP network.

– Create an RSLogix 5000 project

The example RSLogix 5000 project used in this chapter uses a

CompactLogix 5370 L3 controller.

• Prepare the 22B-V2P3N104 drive as described in Chapter 1, Prepare the PowerFlex 40

Drive Hardware on page 13, including:

– Mount the 22B-V2P3N104 Drive

– Wire Power

– Connect the EtherNet/IP Adapter to the Drive

– Configure the EtherNet/IP Adapter

What You Need

You need RSLogix 5000 software to complete the tasks described in this chapter.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sin comentarios

Rockwell-automation Logix5000 Systems: Connecting PowerFlex 40 Drives Manual de usuario Pagina 21