Rockwell-automation SP200 Input Mains Filter Model Number S20-MF1-Y01 Manual de usuario descargar pdf

INPUT MAINS FILTER

(Model Number: S20-MF1-Y014, S20-MF1-45P0, S20-MF1-49P5)

INSTALLATION

ATTENTION: The input mains filter connects between the incoming AC supply line and

the drive input terminals. The filter must be installed by qualified personnel familiar with the

drive and associated machinery. Failure to comply may result in personal injury and/or

equipment damage.

ATTENTION: An incorrectly applied or installed input mains filter can result in component

damage or a reduction in product lifeWirirng or applicationn errors, such as incorrect wiring

layout, incorrect or inadequate AC supply or excessive ambient temperature may result in

malfunction of the system

ATTENTION: To prevent electrical shock, disconnect from power before installing or

servicing. High leakage current, connect to earth.

1. Mount the input mains filter to the panel. Refer to the dimensions drawing shown

on the next page.

2. Using the picture beside as a guide, mount the drive to the filter.

Side by side mounting is also possible where enclosure depth is limited

3. The input mains filter should be connected between the incoming AC supply

and the drive input terminals

Important: The three phase filter may cause groung leakage currents.

Therefore a solid ground connection must be provided

4. Connect remaining wires.

5. To assure that the input mains filter is effective follow the general installation

guidelines as discribed in the SP200 AC Drive Quick Start Guide (D2-3418-1)

Input Mains Filter

Module

Rated Voltage /

Rated Current

To Be Used with

SP200 AC Drive Model:

S20-MF1-Y014

1~ / 200-240V / 14A

S20-X02P3_1000

S20-X04P2_1000

S20-X06P0_1000

S20-Y07P0_1000

S20-MF1-45P0

3~ / 200-460V / 5A

S20-202P3_1000

S20-204P2_1000

S20-401P3_1000

S20-402P0_1000

S20-402P3_1000

S20-MF1-49P0

3~ / 200-460V 9A

S20-207P0_1000

1 2 3 4

INPUT MAINS FILTER 1

Indice de contenidos

Pagina 1 - INPUT MAINS FILTER

INPUT MAINS FILTER (Model Number: S20-MF1-Y014, S20-MF1-45P0, S20-MF1-49P5) INSTALLATION ATTENTION: The input mains filter connects betw

Pagina 2

SP200 Input Mains Filter Specification Table Mains Filter Module S20-MF1-Y014 S20-MF1-45P0 S20-MF1-49P0 Input Voltage, Frequency 1~ / 200-240

Pagina 3

Pagina 4

U.S. Drives Technical Support Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives

Comentarios a estos manuales

Sin comentarios

Rockwell-automation SP200 Input Mains Filter Model Number S20-MF1-Y01 Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation SP200 Input Mains Filter Model Number S20-MF1-Y01. Rockwell Automation SP200 Input Mains Filter Model Number S20-MF1-Y014, S20-MF1-45P0, S20-MF1-49P5 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation SP200 Input Mains Filter Model Number S20-MF1-Y01