Rockwell-automation T3408 ICS Regent DC Digital Input Modules Manual de usuario descargar pdf (Pagina 7)

(T3401, 02, and 08)

DC Digital Input Modules

6011

Mar

installed. Each terminal block consists of ten #6 wire clamp

screw terminals, with each terminal capable of holding two 12

AWG wires.

The module has a separate common power return terminal for

each group of inputs (group 1: channels 1

8, group 2: channels

16). These two groups are

electrically isolated from each

other (2500 volts minimum). Figure

shows the proper

connection of input signals to the input wiring terminals.

When redundant field sensors are installed, each input

module is wired as shown in Figure

. In a fault tolerant

configuration with single field sensors, the input signals are

connected in parallel across all three input modules as shown

in Figure

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Rockwell-automation T3408 ICS Regent DC Digital Input Modules Manual de usuario Pagina 7