Rockwell Automation 22-WIM-N1 Manual de usuario descargar pdf (Pagina 11)

PowerFlex 4M Technical Data

Installation Considerations

Control Wiring

• The control logic is 24V DC and can be set for either Sink or Source control via a DIP switch setting.

• Control terminal screws are sized for a conventional blade screw driver.

• I/O Terminals 1, 2 and 3 are dedicated for Stop, Start and Reverse operation respectively. These I/O Terminals can be

programmed for 2- or 3-Wire operation to meet application requirements.

• I/O Terminals 4 and 5 are programmable and provide added flexibility. Programmable functions include:

- Local Control

- Preset Frequencies

- Jog

- RS485 Control

- Second Accel/Decel

- Auxiliary Fault

- Clear Fault

• Speed can be controlled via a 0-10V input or 4-20 mA input. Both are electrically isolated from the drive.

• One form C relay can be programmed to provide the status of a wide variety of drive conditions. The drive is shipped

with a jumper installed between I/O Terminals 01 and 11 to allow out of box operation from the keypad.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Rockwell Automation 22-WIM-N1 Manual de usuario Pagina 11