Rockwell-automation 1405-M620 Operating Instructions Manual de usuario descargar pdf (Pagina 17)

cos

Address: 1 to 257

Baud Rate: 9.6 or 19.2

kbaud

Publication 1405-IN002C-EN-P - November 2004

Bulletin 1405 (M620) Operating Instructions 17

The changed setting values are stored only when a password code is

entered. The default password code is “3136”. After all the setting

parameters are stepped through, the prompt “PASS” is displayed. If no

password code or a wrong password code is entered, the instrument

will exit the setting mode without storing any changes to the previous

settings.

cos

Enable storage of changed settings

Enter the password code

Store the changed settings

Settings done

Display Functions

The following display related functions are described below.

• Version indication

• Under- and overvoltage alarm indication

• Enabling / disabling the auto-sequencing display mode

• and re-setting peak values

• Re-set energy counters

Version indication: The software version of the instrument is

indicated by this display, which determines the features and functions

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Rockwell-automation 1405-M620 Operating Instructions Manual de usuario Pagina 17