Rockwell-automation 1492-PLTKIT Plotter Kit - User Manual Manual de usuario descargar pdf (Pagina 35)

Initial Setup 2-19

Installing a Pen in the Pen

Station

1. Turn the power on by pressing the “On” button,

2. Press the “Pen Station open/close” button. This will lower the pen

stations to allow a pen to be placed in the station

3. Follow the pen instructions for use on the 1492-PLOTPEN25 or

1492-PLOTPEN35 box by: assembling the pen point to ink cartridge,

shaking pen back and forth to activate ink.

4. Insert pen into pen station. The default pen station is #1 (closest to

user.)

5. Press the “Pen Station open/close” button. This will close the pen

station, sealing it in place. You are now ready to plot.

Removing a Pen from the Pen Station

1. Press the “Pen Station open/close” button. This will open the pen

stations to allow a pen to be removed.

2. Remove the pen from the pen station. Place the cap on the pen.

3. Press the “Pen Station open/close” button. This will close the pen

station.

4. Turn the power off by pressing the “Off ” button.

IMPORTANT

It is important only the 1492-PLOTPEN25 or

1492-PLOTPEN35 pens be installed in the pen station.

Use of a different pen may result in damage to the pen or

plotter.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 61 62

Sin comentarios

Rockwell-automation 1492-PLTKIT Plotter Kit - User Manual Manual de usuario Pagina 35