Rockwell-automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-P Manual de usuario descargar pdf (Pagina 19)

1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input and Output Modules 19

Publication 1732E-IN006C-EN-E - June 2013

Specifications

I/O status Off The input or output channel is inactive, can be calibrated.

Flashing Green Channel is calibrating.

Green 1732E-IF4M12R – Normal operation, inputs being scanned.

1732E-OF4M12R – The output is active and under control.

Flashing Red 1732E-IF4M12R – Fault. Channel is at end of range.

1732E-OF4M12R – Output fault. The output is open (current

mode only), or a low/high clamp alarm is present.

Red 1732E-OF4M12R – Auxiliary power disconnected or off.

IMPORTANT

The Module Status LED indicator will flash red and green for a maximum

30 s while the module completes its POST (Power-On Self Test).

General Specifications

Attributes Value

Voltage, power, max 30V DC

Voltage, power, min 12V DC

Module power 12…30V DC @ 300 mA

Power consumption 3 W @ 24V DC, typical

3.5 W, max (module unloaded)

Isolation voltage 50V (continuous), Basic Insulation Type

Type tested @ 707V DC for 60 s

Communication rate EtherNet/IP

10/100 Mbps

Full or half-duplex

100 meter per segment

Status indicators Module status – red/green

Network status – red/green

Link status – green/yellow

Auxiliary power status – green

I/O LED – red/green

Indicator Status for Modules

Indicator Status Description

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Rockwell-automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-P Manual de usuario Pagina 19