Rockwell-automation 1734-485ASC POINT I/O ASCII User Manual Manual de usuario descargar pdf (Pagina 40)

Publication 1734-UM009B-EN-P - July 2003

2-14 Configuring Your ASCII Module

Sequential

AutoAddress

29 Get Sequential

AutoAddress will

reassign the node

address of every

module to the right.

Each module will

change it’s node

address to one

greater than it’s

neighbor. Make sure

the node address of

this module is the

desired value before

issuing this

command. When the

command is set,

each module to the

right will get a new

address one greater

than it’s neighbor.

0 = Do Nothing

1 = Sequential

Address

Do Nothing 0 USINT

Broadcast Baud

Rate

30 Get This command will

change the baud

rate of this and

every module to the

right to the value

indicated. If

AutoBaud is

ENABLED, this

command will not

change the

operation of the

module at power up.

0 = Do Nothing

1 = 125k Hz

2 = 250k Hz

3 = 500k Hz

Do Nothing 0 USINT

Broadcast AutoBaud 31 Get This command will

change the

AutoBaud attribute

of this and every

module to the right

to the value

indicated. If

AutoBaud is

’disabled’, the Baud

Rate parameter will

set the baud rate the

next time the

module is powered

up.

0 = Do Nothing

1 = Enable

2 = Disable

Do Nothing 0 USINT

Table 2.3 Parameter List

Parameter Parameter

Instance

Access Description Parameter Choices Default

Setting

Default

Value

Data Type

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1734-485ASC POINT I/O ASCII User Manual Manual de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1734-485ASC POINT I/O ASCII User Manual