Rockwell-automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual Manual de usuario Pagina 49
- Pagina / 136
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Publication 1734-UM002C-EN-P - July 2003
Using Auto Start Mode 3-5
3. Insert the DeviceNet network plug and tighten the
holding screws.
4. Set the node address using the 2-position thumbwheel switch.
Valid physical settings range from 00 to 63 (Factory setting =63).
Press either the + or - buttons to change the number.
You can also set the node address to some value between 64-99.
In this case, you can change the adapter’s node address via the
RSNetWorx for DeviceNet software. If a value between 64-99 is
used, at power-up the node address stored in the adapter’s
non-volatile memory is used.
31111-MC
DeviceNet network plug
Holding screw
Holding screw
Adapter
Status
Network
Status
Subnet
Status
1734-ADNX
Field
Power
System
Power
Network Node
Address Thumbwheel
42510
- POINT I/O 1
- DeviceNet Adapter 1
- Important User Information 2
- Summary of Changes 3
- Using Change Bars 3
- New and Revised 3
- Information 3
- Summary of Changes 2 4
- Purpose of this Manual 5
- Who Should Use 5
- What the Manual Contains 6
- Related Terms 7
- Preface 4 8
- Related Products and 9
- Documentation 9
- Conventions Used In 10
- This Manual 10
- Table of Contents 11
- Table of Contents ii 12
- Table of Contents iii 13
- Table of Contents iv 14
- Installing the Adapter 16
- Network Node 17
- Address Thumbwheel 17
- Safety end cap 17
- Installing a Replacement 18
- DeviceNet Adapter in an 18
- Existing System 18
- Wiring the Adapter 19
- Chapter Summary and 20
- What’s Next 20
- Using the Adapter 22
- Set Subnet/Backplane Baudrate 23
- Configure the Subnet I/O 24
- Understanding the 26
- DeviceNet Network 26
- Data Collection 27
- Module Power 27
- Adapter Features 28
- Connections 29
- Baudrates 29
- Auto Start Mode 29
- Auto Catalog Replace 30
- Backplane Autobaud 32
- Auto Address 33
- Physical List Acquire Status 33
- Cycling Node Status 34
- Poll Connection Produce Size 34
- Cycling I/O Mapping 35
- Automatic Device Replacement 35
- Physical Ordering 36
- Interscan Delay (ISD) 37
- Expected Packet Rate 37
- Communicating Through 38
- Communicating with 42
- I/O Modules 42
- Using Diagnostic Tables 43
- Using Auto Start Mode 45
- Why Use Auto Start Mode? 46
- I/O Data? 47
- 31111-MC 49
- Installing the I/O Modules 52
- Adding Non-Backplane 53
- Modules to Subnet 53
- (1734-ADNX Only) 53
- Using RSNetWorx 54
- Beginning Auto Start Mode 55
- Using Custom Configuration 57
- Configuring the 1734-ADN(X) 59
- Adapter’s SubNet 59
- Scanner’s Scanlist 67
- • go online with your adapter 69
- Use the Status Indicators 73
- Guidelines for Using 76
- Your Adapter 76
- Specifications 77
- A-2 Specifications 78
- Specifications A-3 79
- A-4 Specifications 80
- 1734-ADNX Quick Start 81
- 20475w-res 88
- Review of the 1734-ADNX 89
- Rules and the MAC ID 89
- Parameter 89
- Review of Auto Start Mode 91
- Browse the Subnet 95
- • All five are there 96
- Inputs and Outputs 98
- Earlier view of 100
- Navigate Between Networks 103
- Switch Between Networks 105
- Slot Number 107
- Scanlist tab 107
- Parameters 108
- How to Use the 1734-ADNX 113
- Default Data Maps 115
- Message size: 1 Byte 116
- Where: 0 = Off 1 = On 119
- Message size: 6 Bytes 120
- Channel Status 121
- Message size: 4 bytes 122
- Message size: 2 Bytes 122
- Message size: 8 Bytes 125
- 1734-232ASC ASCII Module 127
- D-14 Default Data Maps 128
- 2 Index 130
- Index 3 131
- 4 Index 132
- How Are We Doing? 133
- BUSINESS REPLY MAIL 134
- Rockwell Automation 136
Relacionado con productos y manuales para Equipo Rockwell-automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual
Equipo Rockwell-automation 1794-L34 FlexLogix Controller System User Manual Manual de usuario
(130 paginas)
(130 paginas)
Equipo Rockwell-automation Logix5000 Controllers Messages Programming Manual Manual de usuario
(34 paginas)
(34 paginas)
Equipo Rockwell-automation 1769-SDN Compact I/O DeviceNet Scanner Module Inst Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1784-PCM5/B CABLE Installation Instructions Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1756-EN2T ControlLogix EtherNet/IP Module Installa Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1771-IR Series D RTD Input Module User Manual Manual de usuario
(79 paginas)
(79 paginas)
Equipo Rockwell-automation 1757-SWKIT4000 ProcessLogix R400.0 Installation an Manual de usuario
(293 paginas)
(293 paginas)
Equipo Rockwell-automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4- Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1747-C13 Instruction Sheet for Catalog No. 1747-C1 Manual de usuario
(1 paginas)
(1 paginas)
Equipo Rockwell-automation 1769-IM12 Compact 1769-IM12 240Vdc Input Module Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1784-PCM2/B CABLE Installation Instructions Manual de usuario
(8 paginas)
(8 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales