Rockwell-automation 1734-OB2_OB4_OB8, Series C POINT I/O Output Module Manual de usuario descargar pdf (Pagina 17)

POINT I/O Output Module 17

Publication 1734-IN018C-EN-E - April 2013

Specifications

Indicator Status for Modules

Status Description

Module status Off No power applied to device.

Green Device operating normally.

Flashing green Device needs commissioning due to missing, incomplete, or

incorrect configuration.

Flashing red Recoverable fault.

Red Unrecoverable fault – may require device replacement.

Flashing red/green Device is in self-test mode.

Network status Off Device is not online:

- Device has not completed dup_MAC-id test.

- Device not powered – check module status indicator.

Flashing green Device is online but has no connections in the established state.

Green Device is online and has connections in the established state.

Flashing red One or more I/O connections are in timed-out state.

Red Critical link failure – failed communication device. Device detected

error that prevents it from communicating on the network.

Flashing red/green Communication faulted device – the device has detected a

network access error and is in communication faulted state. Device

has received and accepted an Identity Communication Faulted

Request – long protocol message.

I/O status Off All outputs inactive.

Yellow One or more outputs is active and under control.

POINT I/O Output Module – 1734-OB2, 1734-OB4, 1734-OB8

Attribute Value

Outputs per module 1734-OB2 – 2 (1 group of 2) non-isolated, sourcing

1734-OB4 – 4 (1 group of 4) non-isolated, sourcing

1734-OB8 – 8 (1 group of 8) non-isolated, sourcing

ON-state voltage range, min 10V DC

ON-state voltage range, nom 24V DC

ON-state voltage range, max 28.8V DC

ON-state voltage drop, max 0.2V DC

ON-state current, min per channel 1.0 mA

OFF-state voltage, max 28.8V DC

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Rockwell-automation 1734-OB2_OB4_OB8, Series C POINT I/O Output Module Manual de usuario Pagina 17