Rockwell-automation 1738-AENTR, Series A 1734 POINT I/O and 1738 Armor Manual de usuario descargar pdf (Pagina 31)

Rockwell Automation Publication 1734-UM014B-EN-P - June 2013 23

Configure the Adapter for Your EtherNet/IP Network Chapter 3

To configure your adapter using the BootP utility, perform the following steps:

1. Run the BootP software.

In the BOOTP Request History panel you see the hardware addresses of

devices issuing BootP requests.

2. Double-click the hardware address of the device you want to configure.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 111 112

Adapters 1
Important User Information 2
Who Should Use this 3
Purpose of this Manual 3
Common Techniques Used 4
Table of Contents 5
About the Adapters 9
About the POINT I/O and 10
ArmorPOINT I/O 10
2 Port Adapters 10
What the Adapter Does 12
Adapter Features 12
software releases 13
Specify the 14
Requested 14
Packet Interval (RPI) 14
Support of Rack-optimized 14
Chapter Summary 15
Install Your Adapter 17
Identify Adapter 18
Components 18
Mount the I/O Adapter 19
Install the POINT I/O 21
Adapter Module 21
Install the ArmorPOINT I/O 22
IP Network 25
Configuration 26
Requirements 26
Gateway Address 27
Subnet Mask 28
Network Address 29
Use the Rockwell BootP/ 30
DHCP Utility 30
1. Run the BootP software 31
Save the Relation List 33
Use DHCP Software to 34
Configure Your Adapter 34
Overview 35
Set Up the Hardware 35
Create the Example 37
Application 37
Configure the I/O 38
The New Module dialog opens 40
Add the POINT I/O Adapter 41
IMPORTANT 42
Add the Relay Output Module 44
Add the Digital Output Module 46
Name POINT_Digital_Output 47
Edit the Controller Tags 48
Create the Ladder Program 49
Download the Program to 49
Verify the Module Chassis 50
3. Select Properties 51
4. Click the Connection tab 51
Configure the Adapter with 53
Fixed IP Address 53
Recover From an 54
Overloaded Adapter 54
Software 55
Configure the I/O Modules 58
Connection 64
64
2. Expand the Digital tree 66
Verify the Module 69
Chassis Size 69
Connection tab 70
Access Module Data 72
Troubleshoot the Adapter 73
• A module is missing 74
1738-AENTR 76
Appendix 79
Specifications 79
Environmental Specifications 83
Adapter Web Dialogs 85
Work with the Diagnostics 87
Use the Network Settings Page 89
Use the I/O Connections Page 91
Work with the 93
Configuration Pages 93
Use the Identity Page 94
Work with the Browse 97
Chassis Page 97
Click a module hyperlink to 99
Communication Driver 101
Configure the AB_ETH/IP 104
Rockwell Automation Support 112
Documentation Feedback 112

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1738-AENTR, Series A 1734 POINT I/O and 1738 Armor Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1738-AENTR, Series A 1734 POINT I/O and 1738 Armor