Rockwell-automation 1747-ACNR15 ControlNet Adapter Module User Manual Manual de usuario descargar pdf (Pagina 38)

Publication 1747-UM003A-EN-P

4-10 Application Examples

Create a Ladder Logic Program

The final step is to write a ladder program for the SLC processor, including

configuring the 1747-SCNR for slot 3 of the processor’s chassis. After

downloading the program to your processor, place it into the RUN mode. Your

program should now be able to read data from the 1746-IA16 in word I:3.3,

write to the 1746-OB16 in word O:3.2 and read data from the 1746-IV16 in

word I:3.5.

Note that your ladder program should also contain an unconditional rung with

an OTE instruction addressed to the SCNR scanner’s RUN/IDLE bit, O:3.0/

10 for this example. When the SLC processor is placed into the RUN mode,

this rung sets the SCNR scanner’s RUN/IDLE bit and places the scanner into

the RUN mode as well. The scanner begins executing the configured

connections when the RUN/IDLE bit is set.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 139 140

Sin comentarios

Rockwell-automation 1747-ACNR15 ControlNet Adapter Module User Manual Manual de usuario Pagina 38