Rockwell-automation 1753-IB16 GuardPLC Digital Input Module Installati Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
12 GuardPLC Digital Input Module
Rockwell Automation Publication 1753-IN004C-EN-P - June 2010
Specifications
Technical Specifications – 1753-IB16 Module
Attribute 1753-IB16
Interfaces: GuardPLC
Ethernet
2 x RJ45, 10/100BaseT (with 100 Mbit/s) with integrated switch
Operating voltage 24V DC, -15…20%, w
ss
15% from a power supply with protective separation,
conforming to IEC 61131-2 requirements
Isolation voltage 50V (continuous), Basic Insulation Type, I/O to Ethernet and Ethernet to DC
power
Wiring category
(1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1
.
Category 2 on communication ports, signal ports, and power ports
Wire size
I/O – 0.13…1.3 mm
2
(26…16 AWG) solid or stranded copper wire rated at
75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
Power – 0.33…2.1 mm
2
(22…14 AWG) solid or stranded copper wire rated
at 75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
Ethernet – RJ45 connector according to IEC 60603-7, 2 or 4 pair Category
5e minimum cable according to TIA 568-B.1, or Category 5 cable according
to ISO/IEC 24702
Wire type Shielded on Ethernet
Terminal block torque 0.51 N•m (4.5 lb•in)
Fuse (external) 24V DC power: 10 A (time-lag)
Response time 10 ms
Battery backup None
Current consumption 0.8 A max (with max load), 0.4 A idle current
Enclosure type rating Meets IP20
Width, approx. 152 mm (5.99 in.) including housing screws
Height, approx. 114 mm (4.49 in.) including latch
Depth, approx. 66 mm (2.60 in.) including grounding bolt
Weight, approx. 0.7 kg (1.54 lb)
Digital Inputs
Number of inputs 16 (not electrically isolated)
1 Signal Voltage: 15…30V DC, Current consumption: 2 mA @ 15V
0 Signal Voltage: 5V DC max, Current consumption:1.5 mA max (1 mA @ 5V)
Switching point Typically 7.5V
Switching time Typically 250 μs
Sensor supply 4 x 19.2V / 40 mA @ 24V short-circuit proof
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios