Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Manual de usuario descargar pdf (Pagina 9)

Getting Started with ProcessLogix R500.1 9

Publication 1757-QS500A-EN-P - October 2002

Creating a Controller

The first step in configuring your hardware is to create a controller.

1. In Control Builder, select File⇒New⇒Controllers⇒CPM-Control Processor

Module.

You see the CPM Parameters dialog box (CPM = PLX52):

2. In the CPM Parameters dialog box, select the following:

IMPORTANT

Be careful to enter the CPM Parameters correctly. You will not be able to

change all of them after they are entered.

in this field: enter/select:

CPM Name CPM0101

Network Type ControlNet

Driver Name AB_PCIC-1

Supervisory MAC Address 01 (for the ControlNet 1756-CNB card)

Supervisory Slot Number 00

CPM Slot Number 01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Sin comentarios

Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Manual de usuario Pagina 9