Rockwell-automation 1769-ADN DeviceNet Modules Installation Instructio Manual de usuario descargar pdf (Pagina 11)

Rockwell Automation Publication DNET-IN001B-EN-P - January 2012 11

Install a 1756 DeviceNet Communication Module Chapter 1

Installation Summary

To install a communication module in a 1756 ControlLogix chassis, complete

these steps.

1. Determine Module Slot Location

2. Set the Communication Rate

3. Set the Node Address

4. Install the Module

5. Connect the Module to a DeviceNet Network

6. Download the Add-on Profile

7. Connect to the Module via the USB Port

8. Apply Chassis Power and Check Status Indicators

Grounding Considerations

Refer to these publications for grounding guidelines:

• DeviceNet Media Design and Installation Guide, publication

DNET-UM072

• Industrial Automation Wiring and Grounding Guidelines, publication

1770-4.1

ATTENTION: This equipment is not resistant to sunlight or other sources of UV radiation.

ATTENTION: Prevent Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation.

Follow these guidelines when you handle this equipment:

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• Use a static-safe workstation, if available.

• Store the equipment in appropriate static-safe packaging when not in use.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Sin comentarios

Rockwell-automation 1769-ADN DeviceNet Modules Installation Instructio Manual de usuario Pagina 11