Rockwell-automation 1769-ADN DeviceNet Modules Installation Instructio Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
40 Rockwell Automation Publication DNET-IN001B-EN-P - January 2012
Chapter 3 Configure a Workstation to Operate on a DeviceNet Network
Connect a Computer to the
DeviceNet Network
To access the DeviceNet network, use one of these methods:
Connect directly to the network via a DeviceNet interface device. If you
connect directly to a DeviceNet network, you can access only the devices
on that network.
This graphic shows a computer connected directly to a DeviceNet
network by using a 1784-PCIDS Universal PCI Scanner Card.
Figure 5 - Connect Directly to a DeviceNet Network
Connect to a different network and bridge to the desired DeviceNet
network. This requires no additional programming.
This graphic shows a computer connected to a DeviceNet network
through an EtherNet/IP network used with a ControlLogix system.
Figure 6 - Connect to a DeviceNet Network through an EtherNet/IP Network
DeviceNet Network
Device Device Device DeviceDevice
Device DeviceDevice
EtherNet/IP
Module
ControlLogix
Controller
DeviceNet
Module
DeviceNet Network
EtherNet/IP Network
Computer
Device Device
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 67 68

Comentarios a estos manuales

Sin comentarios