Rockwell-automation 1769-ASCII Compact Module Manual de usuario descargar pdf (Pagina 9)

Compact 1769-ASCII Module 9

Publication

1769-IN068B-EN-P - May 2005

Panel Mount

Mount the module to a panel by using two screws per module. Use M4 or #8

panhead screws. Mounting screws are required on every module.

Panel Mount Procedure With the Dimensional Template

Panel Mount Procedure With Modules as a Template

The following procedure lets you use the assembled modules as a template for

drilling holes in the panel. Due to module mounting hole tolerance, it is

important to follow these procedures.

1. On

a clean work surface, assemble no more than three modules.

2. Using the assembled modules as a template, carefully mark the center

of all module-mounting holes on the panel.

3. R

eturn the assembled modules to the clean work surface, including

any previously mounted modules.

4. D

rill and tap the mounting holes for the recommended M4 or #8

screw.

Host Controller

Compact I/O

Right End Cap

NOTE: All dimensions

are in mm (inches). Ho

spacing tolerance:

±0.4 mm (0.016 in.)

or more than 2 modules: (number of modules - 1) X 35 mm (1.38 in.)

Refer to host controller documentation for this dimension.

132

(5.197)

122.6±0.2

(4.826±0.008)

(1.38)

28.5

(1.12)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Sin comentarios

Rockwell-automation 1769-ASCII Compact Module Manual de usuario Pagina 9