Rockwell-automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I Manual de usuario descargar pdf (Pagina 19)

Publication 1769-UM008A-EN-P - November 2001

Quick Start for Experienced Users 2-3

e. To allow communication between the controller and module,

move the bus lever fully to the left until it clicks. Ensure it is

locked firmly in place.

f. Attach an end cap terminator to the last module in the system by

using the tongue-and-groove slots as before.

g. Lock the end cap bus terminator.

Be sure to observe minimum spacing guidelines on page 3-7 for

adequate ventilation.

ATTENTION

When attaching I/O modules, it is very important

that the bus connectors are securely locked

together to ensure proper electrical connection.

ATTENTION

Remove power before removing or inserting this

module. When you remove or insert a module

with power applied, an electrical arc may occur.

Step 3:

Mount the I/O bank.

Reference

Chapter 3

(Installation and Wiring)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Sin comentarios

Rockwell-automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I Manual de usuario Pagina 19