Rockwell-automation 1769-IF8 Compact 1769-IF8 Analog Input Module Manual de usuario descargar pdf (Pagina 13)

Compact I/O 1769-IF8 Analog Input Module 13

Publication 1769-IN067B-EN-P - September 2005

I/O Memory Mapping

Input Data File

For each input module, slot x, words 0-7 in the input data file contain the analog

values of the inputs.

The bits are defined as follows:

• SGN = Sign bit in two’s complement format

• Nu = Not used. Bit set to 0.

• Sx = General status bit for input channels 0 through 7.

• Lx = Low alarm flag bits for input channels 0 through 7.

• Hx = High alarm flag bits for input channels 0 through 7.

• Ux = Under-range flag bits for channels 0 through 7. When set, the input

signal is under normal range or an open circuit condition exists, in the case

of the 4-20 mA range.

• Ox = Over-range flag bits for channels 0 through 7.

IMPORTANT

If you are using RSLogix 5000, version 15, please refer to RSLogix

5000, Version 15, Controller Tags on page 18.

Word

Bit Position

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

0 SGN Analog Input Data Channel 0

1 SGN Analog Input Data Channel 1

2 SGN Analog Input Data Channel 2

3 SGN Analog Input Data Channel 3

4 SGN Analog Input Data Channel 4

5 SGN Analog Input Data Channel 5

6 SGN Analog Input Data Channel 6

7 SGN Analog Input Data Channel 7

8 Nu Time Stamp Value

9 Nu Nu Nu Nu Nu Nu Nu Nu S7 S6 S5 S4 S3 S2 S1 S0

10 L3 H3 U3 O3 L2 H2 U2 O2 L1 H1 U1 O1 L0 H0 U0 O0

11 L7 H7 U7 O7 L6 H6 U6 O6 L5 H5 U5 O5 L4 H4 U4 O4

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Sin comentarios

Rockwell-automation 1769-IF8 Compact 1769-IF8 Analog Input Module Manual de usuario Pagina 13