Rockwell-automation 1785-Lx0E,D178510.5 QUICK START ETHERNET PLC-9 Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Publication 1785-10.5 - November 1998
2-4 Set up the Hardware
Install the Power Supply
For more information, see the Power Supply Modules
(1771-P4S, -P6S, -P4S1, -P6S1) Installation Instructions, publication
number 1771-2.135 or the AC (120/220V) 16A Power Supply
(1771-P7 Series B/C) Installation Instructions, publication
number 1771-5.39.
Locking
Bar
20619-M
Set the jumpers on
the back side of the
power supply like this:
Connect the power cord to the 120V ac
connector of the power supply module.
Install the power supply in the chassis
and snap the module-locking bar over
the modules
This side plugs into connector on the module.
insert wire
here
place tool here
insert wire
here
place tool here
or
1
2
3
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Comentarios a estos manuales

Sin comentarios