Rockwell-automation 1785-Lx0E,D178510.5 QUICK START ETHERNET PLC-9 Manual de usuario descargar pdf (Pagina 16)

Publication 1785-10.5 - November 1998

2-6 Set up the Hardware

Power Up the System

Power up the system. Check the LED display on the processor. If

your system is operating properly, the PROC LED should be steady

red. If the PROC LED is not red, see chapter 4 for troubleshooting

information before you install any I/O modules.

Install the I/O Modules

For more information, see the installation instructions or user manual

for the particular module you are installing.

Connect the Personal

Computer to the

PLC-5 Processor

For more information, see:

• Enhanced and Ethernet PLC-5 Programmable Controller User

Manual, publication number 1785-6.5.12

• the documentation provided with your communication card

• Data Highway/Data Highway Plus/Data Highway II/Data

Highway 485 Cable Installation Manual, publication 1770-6.2.2

Locking

Bar

Card Guides

20618-M

Install each I/O module and connect

the wiring arm.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Sin comentarios

Rockwell-automation 1785-Lx0E,D178510.5 QUICK START ETHERNET PLC-9 Manual de usuario Pagina 16