Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Manual de usuario descargar pdf (Pagina 18)

18 Ethernet-to-DeviceNet Linking Device

Rockwell Automation Publication 1788-IN055C-EN-P - September 2011

6. Enter the following values into the IP Configuration dialog box.

7. Click Submit Values.

8. Follow the on-dialog box prompts.

9. Click the Reset Module button to reset the linking device.

1. In RSLinx software, choose Communications>Configure Driver.

2. In the Configure Drivers menu, choose Ethernet Devices from the

Available Driver Types pull-down menu.

3. Click Add New.

4. In the Add New RSLinx Drivers pop-up menu, click OK.

5. In the Configure Driver window that appears, enter the IP address of the

linking device.

6. Click Close.

7. Click OK.

In this field Enter

IP Address Any valid value. See your system administrator for a

valid IP address.

Subnet Mask

Any valid value.

Gateway IP Address

DHCP enabled

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Sin comentarios

Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Manual de usuario Pagina 18