Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manual de usuario descargar pdf (Pagina 15)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 15

Install the Linking Device Chapter 2

Set the Linking Device IP Address by Using RSLinx Software

To use RSLinx software to set the IP address of the linking device, follow these

steps.

1. Connect to the linking device using a USB cable.

2. From the Communications menu, choose RSWho.

3. Navigate to the USB port.

4. Right-click the linking device and choose Module Configuration.

5. Click the Port Configuration tab.

6. For Network Configuration Type, click Static to permanently assign this

configuration to the port.

7. Type the desired information in the appropriate boxes.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Sin comentarios

Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manual de usuario Pagina 15