Rockwell-automation 1788-FFCT NI-FBUS Configurator User Manual Manual de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Publication 1788-UM052B-EN-P - April 2002
A-2 Error Messages and Warnings
NIF_SERVER_NOT_RESPONDING Either the NI-FBUS server has not been started, or the server, in its current
state, cannot respond to the request.
NIF_SM_NOT_OPERATIONAL The device is present, but cannot respond because it is at a default address.
NIF_SYMBOL_FILE_NOT_FOUND NI-FBUS could not find the symbol file.
NIF_TIMEOUT The device containing the object is present but did not respond within the
timeout period.
NIF_WRITE_IS_PROHIBITED The device reported that the WRITE_LOCK parameter value is set. The
WRITE_LOCK parameter prohibits writing to the name parameter.
NIF_WRONG_MODE_FOR_REQUEST The device reported that the current function block mode does not allow you to
write to the parameter.
NIFCONF_ERR_ADDRESS_OUT_OF_RANGE This address does not fit in the allowable range of addresses.
NIFCONF_ERR_ADDRESS_USED This address is already taken.
NIFCONF_ERR_BAD_WIRE This wire is not completely attached to an output and input(s).
NIFCONF_ERR_BLOCK_SCHEDULE_CONFLICT A block in this device is already scheduled for this time. Do not schedule more
than one block in the device at the same time.
NIFCONF_ERR_BUF_TOO_SMALL The buffer is too small.
NIFCONF_ERR_CONFIGURING You are configuring this project. If you get this error, stop configuring the
project to continue.
NIFCONF_ERR_CONFUSED_WIRE This wire is not working. The NI-FBUS Configurator has removed it.
NIFCONF_ERR_CORRUPT_FILE The NI-FBUS Configurator found a corrupt file object.
NIFCONF_ERR_COULD_NOT_DETERMINE_SCHEDULE The NI-FBUS Configurator cannot fit the schedule of the loop into the current
schedule. Usually, insufficient time or poor choice of loop times cause this
error. Use integer multiples such as 1, 2, 4, and so on, instead of multiples like
5, 7, 13, and so on, to solve this problem.
NIFCONF_ERR_COULD_NOT_START_THREAD The NI-FBUS Configurator is unable to start a new thread.
NIFCONF_ERR_DD_SIZE_MISMATCH The actual data size does not match the DD data size.
NIFCONF_ERR_DEVICE_NOT_ALIVE The device is not responding.
NIFCONF_ERR_DOWNLOAD_INCOMPLETE The link is only partially configured.
NIFCONF_ERR_DUPLICATE_ADDRESS The address for this device was found elsewhere in the configuration file.
Duplicate addresses are not allowed on a fieldbus link.
NIFCONF_ERR_DUPLICATE_TAG The tag for this object was found elsewhere in the configuration file. Duplicate
tags are not allowed on a fieldbus link.
NIFCONF_ERR_INCOMPATIBLE_VERSION This file was made with a newer version of the NI-FBUS Configurator. There
might be unpredictable problems with the project.
NIFCONF_ERR_INVALID_MACROCYCLE This macrocycle conflicts with a previously defined macrocycle.
NIFCONF_ERR_INVALID_NUMBER This is an invalid number. A number can use the digits 0-9 and the letters a-f.
Hexadecimal numbers can be preceded with
0x.
NIFCONF_ERR_INVALID_TAG This tag is not valid.
NIFCONF_ERR_INVALID_VALUE You have entered an incorrect value. Please check the value(s) and the valid
ranges for the values.
NIFCONF_ERR_LOOP_IS_EMPTY This loop does not contain any blocks.
Error Possible Solution
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 85 86

Comentarios a estos manuales

Sin comentarios