Rockwell-automation 1793-OB4E FLEX INTEGRA 4 PROTECTED OUTPUT Manual de usuario descargar pdf (Pagina 4)

4 FLEX Integra 4 Protected Output Module

Publication 1793-5.2 - January 2000

Wiring

This module is available with 2 styles of connectors; screw-cage and

spring-clamp. Refer to the wiring figure below.

1. Connect individual output wiring to terminals 2 through 5 on row A.

2. Connect associated common to terminals 10 through 13 on row B.

3. Connect +24V dc voltage to terminal 8 on row B.

4. Connect 24V dc common to terminal 0 on row A.

5. If daisy-chaining +24V dc from this module to the next FLEX Integra

module, connect a jumper from terminal 15 to terminal 8 on the next

Integra module.

6. If daisy-chaining 24V dc common from this module to the next FLEX

Integra module, connect a jumper from terminal 7 on this module to

terminal 0 on the next Integra module.

ATTENTION: Total current draw through the module’s

(+) voltage terminals is limited to 10A. Separate power

connections to the module may be required.

1793-OB4P

1793-OB4PS

01234 567

8 9 10 11

13 14 1512

41432

CV CV

CCVVCCVV

OOOO

Ch 0

Ch 1

Ch 2

Ch 3

0 123456 7

8 9 10 11 12 13 14 15

41380

CV CV

CCVVCCVV

OOOO

Ch 0

Ch 1

Ch 2

Ch 3

Where: C = common, V = + voltage and O = output

1 2 3 4 5 6 7 8

Sin comentarios

Rockwell-automation 1793-OB4E FLEX INTEGRA 4 PROTECTED OUTPUT Manual de usuario Pagina 4