Rockwell-automation 1794-IE8H, Series B FLEX I/O 8 Input Hart Analog M Manual de usuario descargar pdf (Pagina 4)

4 FLEX I/O 8 Input HART Analog Module

Publication

1794-IN108D-EN-P - January 2014

Prevent Electrostatic Discharge

ATTENTION

This product is grounded through the DIN rail to chassis ground. Use zinc plated

yellow-chromate steel DIN rail to assure proper grounding. The use of other DIN

rail materials (for example, aluminum or plastic) that can corrode, oxidize, or are

poor conductors, can result in improper or intermittent grounding. Secure DIN

rail to mounting surface approximately every 200 mm (7.8 in.) and use

end-anchors appropriately.

ATTENTION

This equipment is sensitive to electrostatic discharge, which can cause internal

damage and affect normal operation. Follow these guidelines when you handle

this equipment:

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• Use a static-safe workstation, if available.

• Store the equipment in appropriate static-safe packaging when not in

use.

ATTENTION

To comply with the CE Low Voltage Directive (LVD), all connected I/O must be

powered from a source compliant with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

1 2 3 4 5 6 7 8 9 ... 35 36

Sin comentarios

Rockwell-automation 1794-IE8H, Series B FLEX I/O 8 Input Hart Analog M Manual de usuario Pagina 4