Rockwell-automation 1794-L34 FlexLogix Controller System User Manual Manual de usuario Pagina 15
- Pagina / 130
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
15 Publication 1794-UM001G-EN-P - January 2007
Chapter
2
Directly Connect to the Controller via the
Serial Port
Use This Chapter
This chapter describes how to connect to the controller via the serial
port so you can configure the controller and upload and/or download
a project to the controller.
For the FlexLogix controller to operate on a serial network, you need:
• a workstation with a serial port
• RSLinx software to configure the serial communication driver
• RSLogix5000 programming software to configure the serial port
of the controller
Connect the Controller via
the Serial Port
The RS-232 port is a non-isolated serial port built-in to the front of the
FlexLogix controller.
1. Determine whether you need an isolator.
If you connect the controller to a modem or an ASCII device,
consider installing an isolator between the controller and
modem or ASCII device. An isolator is also recommended when
connecting the controller directly to a programming workstation.
See:
• EtherNet/IP Modules in Logix5000
Control Systems User Manual,
ENET-UM001
• ControlNet Modules in Logix5000
Control System User Manual,
CNET-UM001
• DeviceNet Modules in Logix5000
Control System User Manual,
DNET-UM004
For this information See
Connect the Controller via the Serial Port 15
Configure the Serial Driver 18
Select the Controller Path 20
- FlexLogix 1
- Controller System 1
- User Manual 1
- Important User Information 2
- Table of Contents 3
- Chapter 5 4
- Chapter 6 4
- Develop Applications 4
- Table of Contents 5 5
- 6 Table of Contents 6
- Summary of Changes 7
- Introduction 7
- Updated Information 7
- 8 Summary of Changes 8
- Related Documentation 9
- Where to Start 11
- Install Hardware 13
- 14 Where to Start 14
- Serial Port 15
- Configure the Serial Driver 18
- If: Then: 19
- Yes Click OK 19
- Select the Controller Path 20
- Communicate over Networks 21
- EtherNet/IP 22
- Connections over EtherNet/IP 24
- For more information 24
- ControlNet 25
- Connections over ControlNet 26
- DeviceNet 28
- Define Data Blocks 30
- Procedures Manual, 1756-PM001 31
- Communicate with DF1 devices 33
- On this tab Do this 36
- 1. Select User Mode 36
- 1. Select ASCII protocol 36
- Modbus support 38
- Third Party 42
- Use This Chapter 45
- Produce and Consume 45
- (Interlock) Data 45
- Send and Receive 47
- Messages 47
- Connection Overview 49
- Calculate Connection Use 50
- Connections Example 52
- Select I/O Modules 53
- Place Local I/O Modules 54
- Configure I/O 55
- I/O connections 57
- Configure Distributed I/O 59
- Address I/O Data 62
- Determine When Data 63
- Is Updated 63
- Monitor I/O Modules 64
- Reconfigure an I/O Module 66
- In this property: Select: 67
- Develop Programs 70
- Defining tasks 71
- 30252015105 454035 50 6 72
- Defining programs 73
- Defining routines 73
- Sample controller projects 74
- Organize Tags 75
- Select a Programming 76
- Language 76
- Add-On Instructions 77
- Monitor Controller Status 79
- Monitor Connections 80
- Select a System 82
- Overhead Percentage 82
- Use the Event Task 85
- Triggering the Event Task 86
- Configure PhaseManager 89
- State Model Overview 91
- How equipment changes states 92
- Compare PhaseManager to 94
- Other State Models 94
- Minimum System 94
- Requirements 94
- Equipment Phase 95
- Instructions 95
- Maintain the Battery 97
- Estimating Battery Life 98
- Replacing a Battery 99
- ATTENTION 100
- Appendix 101
- Controller LEDs 101
- Using This Appendix 103
- How the Back-up Works 104
- Requirements of the Back-Up 105
- Power-Up and 106
- System Start-up 106
- Developing the FlexLogix 108
- Back-Up Application 108
- Reading Back-up State Rung 112
- Reading Back-up Status 114
- Using Indicators to 115
- Check Status 115
- Development and 115
- Debugging Tips 115
- Instruction Locator 117
- 124 Index 124
- Index 125 125
- 126 Index 126
- How Are We Doing? 127
- BUSINESS REPLY MAIL 128
- Rockwell Automation 130
Relacionado con productos y manuales para Equipo Rockwell-automation 1794-L34 FlexLogix Controller System User Manual
Equipo Rockwell-automation Logix5000 Controllers Messages Programming Manual Manual de usuario
(34 paginas)
(34 paginas)
Equipo Rockwell-automation 1769-SDN Compact I/O DeviceNet Scanner Module Inst Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1784-PCM5/B CABLE Installation Instructions Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1756-EN2T ControlLogix EtherNet/IP Module Installa Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1771-IR Series D RTD Input Module User Manual Manual de usuario
(79 paginas)
(79 paginas)
Equipo Rockwell-automation 1757-SWKIT4000 ProcessLogix R400.0 Installation an Manual de usuario
(293 paginas)
(293 paginas)
Equipo Rockwell-automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4- Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1747-C13 Instruction Sheet for Catalog No. 1747-C1 Manual de usuario
(1 paginas)
(1 paginas)
Equipo Rockwell-automation 1769-IM12 Compact 1769-IM12 240Vdc Input Module Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1784-PCM2/B CABLE Installation Instructions Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1771-OQ16/C Isolated Output Module Installation In Manual de usuario
(16 paginas)
(16 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales